Step 1: Put together Your Material
Select a material like satin or cotton and iron it to take away wrinkles. It will guarantee a clean and flat floor for stitching.
Step 2: Hoop the Material
Place the material and a layer of cut-away stabilizer within the embroidery hoop. Be sure the material is taut however not stretched to keep away from puckering throughout stitching.
Step 3: Load the Design in Machine
Add your cutaway bow design to your embroidery machine. Should you don’t have a digitized design but, don’t fear! At ZDigitizing, we will do the digitizing for you at a really low worth.
Our group guarantees high-quality designs with a super-fast turnaround time so you can begin your embroidery rapidly. A well-digitized design will sew easily and provides your mission a clear {and professional} look. Place your order immediately.
As soon as the design is prepared, use the alignment options in your embroidery machine to heart it correctly inside the hoop for correct stitching.
Step 4: Sew the Placement Line
Begin the embroidery machine to sew a placement line onto the stabilizer. This line will information the place to place the bow material.
Step 5: Place the Bow Material
Place your bow material fastidiously over the stitched placement line. Use momentary spray adhesive or pins to carry it securely in place.
Step 6: Sew the Tack Down Line
Run the machine once more to sew the tack down line, which secures the bow material to the bottom material.
Step 7: Trim Extra Material
Take away the ring from the machine and punctiliously trim away the additional bow material across the tack down line. Be exact however keep away from reducing the stitches.
Step 8: Lower Contained in the Bow Design
In case your design contains cutout sections, fastidiously trim the material contained in the bow to realize the cutaway impact, avoiding injury to the stitching.
Step 9: End with Satin Sew
Reattach the ring to the machine and run the ultimate satin sew across the edges of the bow. It will give it a clean and polished end.
Step 10: Take away Stabilizer
As soon as the embroidery is full, gently trim or tear away any additional cut-away stabilizer from the again of the material.
Step 11: Ultimate Touches
Calmly press your completed design to take away any wrinkles and trim any free threads for a clear {and professional} look.